Obviously you drain the oil pan and remove the filter but how do you get all of the oil in the block out see l have water in my oil and before l put new oil in there l wanna get all the crappy oil out first.

Put 5 quarts in it and drive around the block and change it. problem solved. next.

Do you know if you have cured the source of the water in the oil?

if you have water in the oil you got more problems to worry about than just getting all the oil out.ie head gaskets?? water pump propeler fell off??

hi,

when l change my oil, l drain it out the pan, then l flush the engine with kerosene about 2 gallons is good. (just enough so it can go through the heads, and it cleans out all the oil journals.)

let it drain out for awhile 2hrs.put on new filter fill with oil run in driveway for about 1/2hr make sure oil pressure is good the whole time its running drain it replace filter again should be good to go.DO NOT PUT ANY KEROSENE OR ANY OTHER LIQUID CLEANERS IN ENGINE.YOU WILL BLOW IT UP !!